Updating ios249 with wad manager

13-Aug-2017 23:22 by 2 Comments

Updating ios249 with wad manager - Free chat with shemailes in perth

Waninkoko's 4.2 SAFE updater is already out here, but it is not recommended that you update to 4.2 anyway.An online update will remove any cios you had on the wii!! The only extra that you will need is an SD card (I reckon you all have one by now) formatted as FAT32.

If its not for you then you're going to have to use torrents, check my guide on them if you are new to the concept.

If you get the 'system files corrupted' screen don't panic, just reinstall preloader and if that doesn't fix it reinstall your current system menu with Wad Manager.

UPDATES If you want to update your c IOS in the future or if you want to install a different one just run the installer and select ios249 as the one it should use, it will overwrite the old one so no need to uninstall.

The USB loader will still work though so just follow the guide as normal. " , select 'Yes' and the Hackmii installer will run. Install Bootmii as boot2 if you can, if not then install it as an IOS then go back and install the Homebrew Channel.

When completed you will have everything you need to play backups and the SD card does not have to be left in, you can delete everything off it if you wish. The Homebrew channel will ask you to update - say NO! BACK UP YOUR NAND (OPTIONAL) Making a NAND backup with Bootmii is highly recommended, it will recover your Wii from 99.9% of bricks.

If you are on 3.1 you will have to update to 4.0 first, make sure you install the patched IOS60 first though still. If it doesn't, turn your wii off and on again whilst holding down reset and it will load the Priiloader menu.

Before you update to 4.1 make sure you have at least 250 blocks free or you will brick, install IOS60-patched first with Wad Manager using IOS249, then run Firmware Updater 4.1. THE FINAL STEP Priiloader is also an optional install, if you don't want it just skip b & c, but you must do step d, system menu hacks can be taken care of by Starfall (3.2) or startpatch (4/4.1), if you want them click my sig and have a look through my mediafire. a) If you are on system menu 4/4.1 use Wad Manager with default settings (IOS249 & SD card) to install IOS60- make sure you do this before you install Priiloader. c) Select 'system menu hacks' in the Priiloader menu, and enable the hacks that you want - 'skip disc update check' and the region free ones are all you need.

If your Homebrew Channel flips upside down then continue with the guide and when completed reinstall the homebrew channel. UPDATE YOUR SYSTEM MENU VERSION Warning - If you don't install the patched IOS60 first you will brick! Open the Homebrew Channel and load Priiloader, press to install.

This step is optional unless you are on 3.1, 3.3 or 3.4 in which case you must update, if you are on 3.2 or 4.0 you can update if you want and it is recommended that you do, if you are on 4.1 there is no need obviously! After install, your Wii should reboot and load the Priiloader menu.

If those buttons don't work then you will have to use a Gamecube controller.

c) Now select the icon with a green arrow pointing from the chip to the SD card and follow the on screen instructions.

If you are on 3.3 or 3.4 then you must update now - DO NOT install priiloader until you have updated as it will cause untold problems! Select 'save settings' and wait for confirmation message to display 'settings saved'. Set 'Autoboot: System Menu' using D-Pad, then select save settings. d) In the Priiloader menu select Homebrew Channel (if you didn't install Priiloader then just open HBC as normal), run Wad Manager 1.4, use default settings (IOS249 & SD card) and install these wads from the 'wad' folder: IOS38-64-v3867 IOS50-64-v4889 IOS53-64-v5406 IOS55-64-v5406 Neogamma Channel - R8 Then restart your Wii. You will now have the safety/hacks of Priiloader & Bootmii, Neo Gamma R8 backup loader that has 99% compatibility, c IOS249 r17, IOS38, 53 & 55 for newer games and IOS50 to help prevent disc update bricks.